VEGA VEGAMIP R61 Receiving unit - Relay - Manual (Page 34)

Error Cause Rectification
Instrument switches fre-
quently with certain levels Wave movements in the
vessel Adjust or increase switching delay
Effects through interfering
reflections Adjust the instrument more insensitive
Depending on the reason for the fault and the measures taken, the
steps described in chapter "Setup" must be carried out again or must
be checked for plausibility and completeness.
Should these measures not be successful, please call in urgent cases
the VEGA service hotline under the phone no. +49 1805 858550.
The hotline is also available outside the normal working hours on
seven days a week around the clock.
Since we offer this service worldwide, the support is in English
language. The service is free-of-charge, only the standard telephone
costs will be charge.
7 .3 Exchange of the electronics
If the electronics module is defective, it can be replaced by the user.
In Ex applications only an electronics module with respective Ex
approval may be used.
You find all information to the electronics exchange in the operating
instructions of the new electronics module.
7 .4 How to proceed in case of repair
If a repair is necessary, please proceed as follows:
You can download a return form (23 KB) from our homepage at www.
vega.com under: "Downloads - Forms and certificates - Repair form".
By doing this you help us carry out the repair quickly and without
having to call back for needed information.
l Print and fill out one form per instrument
l Clean the instrument and pack it damage-proof
l Attach the completed form and, if need be, also a safety data
sheet outside on the packaging
l Please ask the agency serving you for the address of your return
shipment. You can find the competent agency on our website
www.vega.com.
Reaction after fault rec-
tification
24 hour service hotline
34 VEGAMIP R 61 • - Relay
7 Maintenance and fault rectification
35786
-EN
-120228