VEGA VEGAWAVE 62 - two-wire - Manual (Page 17)

1
4 4 4
2 3
Fig. 9: Material versions, single chamber housing
1 Plastic (not with EEx d)
2 Aluminium
3 Stainless steel (not with EEx d)
4 Filter element for pressure compensation or blind stopper with version IP 66/
IP 68, 1 bar (not with EEx d)
For connection to a signal conditioning instrument. The sensor is
powered via the connected signal conditioning instrument. For further
information see the "Technical data" in the "Supplement".
The wiring example is applicable for all suitable signal conditioning
instruments.
If the mode switch of VEGAWAVE 62 is correctly set to "max.", the
control lamp on VEGAWAVE 62 lights.
l red - with submerged vibrating element
l green - with uncovered vibrating element
Take note of the operating instructions manual of the signal
conditioning instrument. Suitable signal conditioning instruments are
listed in chapter "Technical data".
1
Fig. 10: Wiring plan
1 Voltage supply
Housing overview
Wiring plan
VEGAWAVE 62 • - two-wire 17
5 Connecting to power supply
32255
-
EN
-120418