VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) enamel Profibus PA - Manual (Page 37)

l Vessel form
l Damping
l Linearisation curve
l Sensor-TAG
l Displayed value
l Scaling unit (Out-Scale unit)
l Positions after the decimal point (scaled)
l Scaling PA/Out-Scale 4 values
l Unit of measurement
l Language
The following safety-relevant data are not read out or written:
l Sensor address
l PIN
Copy sensor data
Copy sensor data?
Basic adjustment
If the "Reset" is carried out, the sensor resets the values of the
following menu items to the reset values (see chart):
2)
Function Reset value
Sensor address 126
Max. adjustment 0 m(d)
Min. adjustment Meas. range end in m(d) 3)
Medium Liquid
Vessel form not known
Damping 0 s
Linearisation linear
Channel PV lin. %
Sensor-TAG Sensor
Displayed value PA-Out
Extended settings None
Additional PA value Secondary Value 1 %
Out-Scale-Unit %
PV-Out-Scale 0.00 lin-% = 0.0 %
100.0 lin-% = 100 %
Unit of measurement m(d)
The values of the following menu items are not reset to the reset
values (see chart) with "Reset":
2) Sensor-specific basic adjustment.
3) Depending on the sensor type, see chapter "Technical data".
Reset
VEGAPULS 66 enamel • Profibus PA 37
6 Set up with the indicating and adjustment module PLICSCOM
33335
-EN
-090305