VEGA VEGAFLEX 67 (-200…+400°C) 4 … 20 mA_HART four-wire - Manual (Page 33)

6 .6 Saving the parameter adjustment data
W e recommended noting the adjusted data, e.g. in this operating
instructions manual, and archiving them afterwards. They are thus
available for multiple use or service purposes.
I
f VEGAFLEX 67 is equipped with an indicating and adjustment
module, the most important data can be read out of the sensor into the
indicating and adjustment module. The procedure is described in the
operating instructions manual "Indicating and adjustment module" in
the menu item "Copy sensor data". The data remain there permanently
even if the sensor power supply fails.
I f it is necessary to exchange the sensor, the indicating and adjustment
module is inserted into the replacement instrument and the data are
written into the sensor under the menu item "Copy sensor data".
VEGAFLEX 67 • 4 … 20 mA/HART - four-wire 33
6 S et up with the indicating and adjustment module PLICSCOM
32312
-
EN
-120329