VEGA VEGAFLEX 65 Foundation Fieldbus - Manual (Page 27)

Function Reset value
Language No reset
Factory setting
Like basic adjustment, but in addition, special parameters are reset to
default values.
3)
Peak value
The min. and max. distance values are reset to the actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
3) Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Optional settings
VEGAFLEX 65 • Foundation Fieldbus 27
6 Set up with the indicating and adjustment module PLICSCOM
31848
-
EN
-120329