VEGA PLICSCOM Heating for the indicating and adjustment module - Manual (Page 16)

9 Supplement
9.1 Technical data
Technical data
All technical data are listed in the operating instructions manual of the respective sensor.
General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, non-wetted parts
- Cable gland with plug M12x1
316L
Process conditions
Process temperature
Depending on the sensor
Ambient, storage and transport temperature on the instrument housing
- without PLICSCOM
-40 … +80 °C (-40 … +176 °F)
- with PLICSCOM -15 … +70 °C (+5 … +158 °F)
- with PLICSCOM and heating -40 … +70 °C (-40 … +158 °F)
Electromechanical data
Additional cable gland
1x plug M12x1
Voltage supply
The heating must be powered with a protective extra-low voltage accordin to VDE 0106 part
101.
Supply voltage
24 V DC +5%
Power 1.7 W
16 Heating for the indicating and adjustment module PLICSCOM
Supplement
31708
-EN
-061219