VEGA VEGAPULS 68 (≥ 2.0.0 - ≤ 3.8) Profibus PA - Manual (Page 17)

1
2
Fig. 7: Mounting position
1 Reference plane
If you cannot keep this distance you should carry out a false echo
storage before setup. This applies mainly if buildup on the vessel wall
is expected. In this case, we recommend repeating a false echo
storage later with existing buildup.
To measure as much of the vessel volume as possible, the sensor
should be aligned so that the measuring beam reaches the lowest
level in the vessel. In a cylindrical silo with conical outlet, the easiest
way is to mount the instrument in the center of the silo. Orientation
VEGAPULS 68 • Profibus PA 17
4 Mounting
29263
-EN
-090305