VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) standpipe ver. 4 … 20 mA_HART two-wire - Manual (Page 48)

Process conditions
F or the process temperature and the vessel pressure, you also have to note the specifications on
the type label! Always the lowest value is applicable!
P rocess temperature (measured on the process fitting depending on process seal
-
FKM (V iton) -40 … +80 °C (-40 … +176 °F)
-
FKM (V iton) with temperature adapter -40 … +150 °C (-40 … +302 °F)
-
FFKM (K alrez 6375) -20 … +150 °C (-4 … +302 °F)
-
graphite (coupling cone ceramic) -60 … +250 °C (-76 … +482 °F)
-
graphite (coupling cone ceramic) with
temperature adapter
-60 … +400 °C (-76 … +752 °F)
V essel pressure relating to the antenna cone
-
PTFE -100 … 4000 kPa/-1 … 40 bar (-14.5 … 580 psi)
with PN 40
-
C eramic -100 … 16000 kPa/-1 … 160 bar (-14.5 … 2321 psi)
with PN 160
V essel pressure relating to the flange nom-
inal stage
see supplementary instructions manual "Flanges
according to DIN-EN-ASME-JIS"
V ibration resistance mechanical vibrations with 1 g and 5 … 100 Hz 8)
8) T ested according to the regulations of German Lloyd, GL directive 2.
48 VEGAPULS 66 standpipe version • 4 … 20 mA/HART two-wire
10 S upplement
28741
-EN
-090305