VEGA VEGAVIB 65 - two-wire - Manual (Page 14)

In case of horizontal mounting in adhesive products, the
surfaces of the tuning fork should be vertical in order to reduce
buildup on the tuning fork. On the screwed version you will find
a marking on the hexagon. With this, you can check the
position of the tuning fork when screwing it in. When the
hexagon touches the seal, the thread can be still turned by
approx. half a turn. This is sufficient to reach the recom-
mended installation position.
With flange versions, the fork is directed to the flange holes.
1
Fig. 5: Vertical installation - marking
1 Marking on top with screwed version
In applications such as grit chambers or settling basins for
coarse sediments, the vibrating element must be protected
against damage with a suitable baffle.
This baffle must be manufactured by you.
>125
Fig. 6: Baffle protection against damages
Adhesive products
Baffle protection against fall-
ing rocks
14 VEGAVIB 65 - with two-wire output
Mounting
29286
-EN
-060508