VEGA VEGABAR series 50_60 - Manual (Page 5)

5
3 Product description
Electronics module • VEGABAR series 50/60
30175-EN-130322
3 Product description
3.1 Configuration
The scope of delivery encompasses:
•
Electronics module
•
Documentation
– this operating instructions manual
3.2 Principle of operation
The electronics module VEGABAR 50/60 is suitable for exchange
with the following pressure transmitters:
•
VEGABAR 51
•
VEGABAR 52
•
VEGABAR 53
•
VEGABAR 54
•
VEGABAR 55
•
VEGABAR 66
•
VEGABAR 67
3.3 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
following ISO 4180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE
foil is also used. Dispose of the packaging material via specialised
recycling companies.
Transport must be carried out under consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Scope of delivery
Application area
Packaging
Transport
Transport inspection
Storage