VEGA VEGASON 66 4 … 20 mA_HART four-wire - Manual (Page 10)

The backlight of the indicating and adjustment module is
powered by the sensor
1)
. Requirement is a certain height of the
supply voltage. The eact voltage specifications are stated in
the "Technical data" in the "Supplement".
3.3 Operation
VEGASON 66 can be adjusted with four different adjustment
media:
l
the adjustment module PLICSCOM
l
the suitable VEGA DTM in conjunction with an adjustment
software according to the FDT/DTM standard, e.g.
PACTware™ and PC
l
the manufacturer-specific adjustment programs AMS™ or
PDM
l
a HART handheld
The entered parameters are generally saved in VEGASON 66,
optionally also in PLICSCOM or in PACTware™.
3.4 Storage and transport
Your instrument was protected by packaging during transport.
Its capacity to handle normal loads during transport is assured
by a test according to DIN EN 24180.
The packaging of standard instruments consists of environ-
ment-friendly, recyclable cardboard. For special versions, PE
foam or PE foil is also used. Dispose of the packaging material
via specialised recycling companies.
l
Storage and transport temperature see "Supplement -
Technical data - Ambient conditions"
l
Relative humidity 20 … 85 %
1) This function is presumably available from October 2006.
Packaging
Storage and transport tem-
perature
10 VEGASON 66 - 4 ... 20 mA/HART - four-wire
Product description
28783
-EN
-060731