VEGA VEGAVIB 63 Lock fitting ARV-VB63.2 - pressure range: -1…16 bar - Manual (Page 11)

6 Dismounting
6.1 Dismounting procedure
Note chapter "Mounting" and carry out the described steps in
reverse order.
Warning:
If you want to remove the lock fitting for service or control
purposes, make sure that the vessel is unpressurised.
If you proceed as follows, it is not necessary to readjust the
switching point and the lock fittings must not be dismounted
completely.
1 Switch off power supply of the sensor
2 Remove all connection cables
3 Loosen the mounting boss with a screwdriver
4 Remove the sensor together with the lock fitting
6.2 Disposal
The ARV-VB63.2 consists of materials which can be recycled
by special recycling companies. Mark the instrument as scrap
and dispose it according to the legal regulations.
Materials: see "Technical data"
If you cannot dispose of the instrument properly, please
contact us about disposal methods or return.
Lock fitting ARV-VB63.2 - – pressure range -1 … 16 bar 11
Dismounting
29754
-EN
-050804