VEGA VEGASON series 60 Electronics module - Manual (Page 5)

3 P roduct description
3 .1 Configuration
The scope of delivery encompasses:
l
Electronics module VEGASON series 60
l
Documentation
-
this operating instructions manual
3 .2 Principle of operation
The VEGASON series 60 electronics module is suitable for
exchange with VEGASON series 60 ultrasonic sensors. It is
available in different versions (see chapter "Mounting prepa-
rations").
3 .3 Packaging, transport and storage
Your instrument was protected by packaging during transport.
Its capacity to handle normal loads during transport is assured
by a test according to DIN EN 24180.
The packaging of standard instruments consists of environ-
ment-friendly, recyclable cardboard. For special versions, PE
foam or PE foil is also used. Dispose of the packaging material
via specialised recycling companies.
Transport must be carried out under consideration of the notes
on the transport packaging. Nonobservance of these instruc-
tions can cause damage to the device.
The delivery must be checked for completeness and possible
transit damage immediately at receipt. Ascertained transit
damage or concealed defects must be appropriately dealt
with.
Up to the time of installation the packaging must be closed and
stored according to the orientation and storage markings on
the outside.
Unless otherwise indicated, the packaging must be stored only
under the following conditions:
l
Not in the open
l
Dry and dust free
l
Not exposed to corrosive media
Scope of delivery
Area of application
Packaging
Transport
Transport inspection
Storage
Electronics module - VEGASON series 60 5
Product description
30206
-
EN
-070510