VEGA VEGAVIB 62 - two-wire - Manual (Page 20)

Mode on the
sensor Level Signal current -
Sensor Signal lamp -
sensor
Max.
Overflow protec-
tion 8 mA
Green
Max.
Overflow protec-
tion approx. 16 mA
Red
Min.
Dry run protection approx. 8 mA
Green
Min.
Dry run protection approx. 16 mA
Red
Fault message
(min./max. mode) any < 2.3 mA
flashes red
VEGAVIB 62 level switch with signal conditioning instrument 1 )
The following chart provides an overview of the switching conditions
depending on the adjusted mode of the signal conditioning instrument
and the level.
Note:
Keep in mind that the mode switch of VEGAVIB 62 must be always set
to "max.".
Mode on the
signal condi-
tioning in-
strument Level Signal cur-
rent - Sensor Signal lamp -
sensor Signal lamp -
signal condi-
tioning in-
strument
Mode A
Overflow pro-
tection approx. 8 mA
Green
1) You will find suitable signal conditioning instruments in chapter "Technical
data".
20 VEGAVIB 62 • - two-wire
6 Set up
29274
-EN
-120418