Kaiser S4571 User Manual
Page 53
53
EN
Changing the Program
In case you would like to change the wash
program while the dishwasher is in operation,
make the following steps:
Slightly open the door with all necessary
precautions.
As soon as the washing arms have
stopped moving, you can open the door
completely,
Press and keep the button program setting
1 longer than for three seconds. Now use
the same button to select a required wash
program,
The selected program is indicated by the
corresponding window
2 on the panel and
3 on the LCD display,
Close the door with some force to ensure it
is closed properly.
You can hear a click which indicates that the door
is tightly closed.
Some seconds later the dishwasher begins a
wash cycle.
Wash cycle ending
At the end of a wash cycle, the time display
4
flashes for 8 seconds while the buzzer produces
an acoustical signal.
Open the door. Press the main switch
5 to switch
off the dishwasher.
Wait a few minutes before you start to reload the
dishwasher: the dishes will get dry and not so hot.
2
5
1
4
3