VEGA Housing type 505 - Manual (Page 7)

Housing type 505 7
Mounting
- Insert the red safety pin through the gaps
of the power supply board and the guide
rail. This fastens the power supply board.
Connection plug
Power supply board
Guide rail
Gap
Safety pin
Terminal strips
Socket
Adapter plug
- Remove the adapter plug from the housing
socket.
- Insert the upper part of the housing into the
socket again, tighten the two screws on the
housing front.
- Now you can connect the supply voltage
for the power supply unit (90 … 250 V AC)
on the terminal strips of the socket.