VEGA VEGASON 83 … 87 ECHOFOX - Manual (Page 30)

VEGASON 83 … 87 30
5 Set-up
Set-up can be realized in different ways. Observe the
separate instruction for ECHOFOX
® -sensors.
5.1 Sensor and signal conditioning
instrument (e.g. VEGAMET)
The set-up can be made directly via the operating
elements of the signal conditioning instrument or via a PC
(equipped with VVO-Software).
In this case the computer can be connected via
VEGACONNECT with the signal conditioning instrument
or directly with the sensor.
Attention, in case of Ex-sensors in the Ex-area,
VEGACONNECT must only be connected in the Ex-area
(e.g. signal conditioning instrument).
5.2 Sensor and processing system
(VEGALOG 571)
The set-up can be only made via PC (equipped with VVO-
Software).
The PC must be connected with a suitable central unit
(CPU) with the processing system VEGALOG 571
(interface RS 232).
5.3 Compact instrument
The PC (equipped with VVO-Software) must be directly
connected via VEGACONNECT with the compact
instrument or the current output.
5 Set-up