VEGA Housing type 504 - Manual (Page 3)

Housing type 504 3
Product description
1 Product description
1.1 Function and configuration
Housing type 504 is used for single mounting
of an instrument of the new series 500. The
module instruments of series 500 (5 TE width)
such as VEGATOR…, VEGAMET…,
VEGASEL…, VEGATRENN…, VEGACOM…
can be installed in front panels.
Housing type 504 consists of three compo-
nents:
- metal housing body with front frame
- plug and terminal socket in the selected
technology
Wire-Wrap, Standard connection
1,0 x 1,0 mm
plug connection 2,8 x 0,8 mm
Termi-Point Standard connection
2,8 x 0,8 mm
terminals 0,5 mm
2
soldering connection
- bag with two guide rails, coded key and
blue Ex-separating chamber
1.2 Technical data
Materials
Plug-in and terminal socket PBT or Polycarbonate (GFK reinforced)
Housing galvanized steel sheet
Front frame stove-enameled Aluminium
Guide rails Polycarbonate (GFK reinforced)
Ex-separating chamber Polycarbonate (GFK reinforced)
Multipoint connector
Type DIN 41 612, series F, 48-pole
(33 poles connectable)
Connection technology
Choice out of 5 systems:
- Wire-Wrap, Standard connection 1,0 x 1,0 mm
- Plug connection 2,8 x 0,8 mm
- Termi-Point Standard connection 2,8 x 0,8 mm
- Screw terminals 0,5 mm 2
- Soldering connection
Dimensions
Front panel cut-out 138 +1,0 mm x 33 +0,6 mm
Front panel thickness 1 … 10 mm
Min. instrument distance ≥ 44 mm
(distance to the next front panel cut-out)
Connection length L (dependent on connection):
- Wire-Wrap L = 32 mm
- Plug connection L = 18 mm
- Termi-Point L = 32 mm
- Screw terminals L = 24 mm
- Soldering connection L = 22 mm