Wiha Tools Inomic brochure - Manual (Page 10)

Z 06 9 15 Z 12 9 15
Z 06 9 16 Z 01 9 16 Z 12 9 16
Z 01 9 15
Order-No.
30655 7 180 155 5
Inomic ® combination pliers.
Head shape: Innovative head with three parallel gripping
surfaces at opening angles of 2°, 10° and
20° offers an improved and secure hold of
the workpiece. Crosswise-profiled gripping
surfaces with specially shaped teeth for
gripping in all directions.
Application: For gripping, holding and cutting.
With improved access to the objects to be
processed.
Order-No.
30660 1 160 150 5
Order-No.
30663 2 160 140 5
Inomic ® side cutters.
Head shape: Innovative head with dual cutting function.
Cutting edge with bevel near the joint,
cutting edge without bevel in the front
cutting area.
Application: For cutting hard wires in the joint area.
Flush, burr-free cutting of soft wires, cables
and plastics in the front cutting area.
With improved access to the objects to be
processed.
Order-No.
30658 8 180 155 5
Inomic ® VDE combination pliers.
Protective isolation 1,000 VAC,
GS inspected.
Standards: Manufactured acc. to
IEC 60900:2004.
Head shape: Innovative head with three parallel gripping
surfaces at opening angles of 2°, 10° and
20° offers an improved and secure hold of
the workpiece. Crosswise-profiled gripping
surfaces with specially shaped teeth for
gripping in all directions.
Application: For gripping, holding and cutting. With im-
proved access to the objects to be processed.
Order-No.
30661 8 160 150 5
Inomic ® VDE needle nose pliers.
Protective isolation 1,000 VAC,
GS inspected.
Standards: Manufactured acc. to
IEC 60900:2004.
Head shape: Straight shape with blade and three
stripping points 2.5 mm², 1.5 mm²,
0.75 mm². Parallel and crosswise profiling
for gripping in all directions.
Application: For gripping, holding, cutting and stripping.
With improved access to the objects to be
processed.
Order-No.
30666 3 160 140 5
Inomic ® VDE side cutters.
Protective isolation 1,000 VAC,
GS inspected.
Standards: Manufactured acc. to IEC 60900:2004.
Head shape: Innovative head with dual cutting function.
Cutting edge with bevel near the joint,
cutting edge without bevel in the front
cutting area.
Application: For cutting hard wires in the joint area.
Flush, burr-free cutting of soft wires, cables
and plastics in the front cutting area.
With improved access to the objects to be
processed.
Inomic ® needle nose pliers.
Head shape: Straight shape with blade and three
stripping points 2.5 mm², 1.5 mm²,
0.75 mm². Parallel and crosswise profiling
for gripping in all directions.
Application: For gripping, holding, cutting and stripping.
With improved access to the objects to be
processed.
Overview of the Inomic ® pliers.
Combination pliers Needle nose pliers Side cutters
Combination pliers Needle nose pliers Side cutters
Typ Typ Typ
Typ Typ Typ