Example of installation on the floor mat, Or on the chassis, Replacing the terminal cover – Pioneer PRS-D410 User Manual

Page 13

ENGLISH

ESPAÑOL

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

кмллдав

Example of installation on the
floor mat or on the chassis

1. Place the amplifier where it is to be

installed. Insert the supplied tap-
ping screws (4

× 18 mm) into the

screw holes. Push on the screws
with a screwdriver so they make
marks where the installation holes
are to be located.

2. Drill 2.5 mm diameter holes at the

point marked, and install the ampli-
fier, either on the carpet or directly
to the chassis.

Replacing the terminal cover

1. Align the unit and terminal cover,

and insert the screw.

2. Tighten the screw with a 4 mm

hexagonal wrench.

Tapping-screws
(4

× 18 mm)

Floor mat
or chassis

Drill a 2.5 mm diameter hole

Screw

Terminal Cover