VTech LS6195_-13-15-16-17 Manual - Manual (Page 29)

Telephone operation
25
Transfer a call
While on an outside call, you can transfer the call from one system device
to another.
To transfer a call from the handset:
During a call, press MENU.
Press or to scroll to Transfer, then press SELECT.
If you have only one handset, the outside call is put on
hold and your handset shows Calling base briefly, then
displays Transferred.
If you have more than one handset, use the dialing keys
to enter a destination device number ( 7 for the telephone
base, or 1 to 5 for HANDSET 1 to HANDSET 5). The The
outside call is put on hold and your handset shows
Calling HS X or Calling base briefly, then
displays Transferred.
The destination device rings and shows Incoming call.
To answer the call, press , press on the telephone base or
press , or any dialing key ( 0-9, or ) on the
destination handset.
To transfer a call from the telephone base:
Pick up the handset from the telephone base.
If the destination handset is out of range, your handset shows Unable to call and
then automatically returns to the external call.
If the destination device does not answer the transferring call within 30 seconds,
the call will be reverted to the originating handset. If you do not press , or
any dialing key (0-9, or ) on the handset to reconnect the outside call within
30 seconds, the call ends automatically.
1.
2.
•
•
3.
•
•
•
Transfer
ANS ON ECO
Calling base
ANS ON ECO
Transferred
ANS ON ECO
ANS
ON
Speaker 00:00:07
10:01 AM
9
12/08