VTech CS6609 Manual - Manual (Page 3)

3
Add and register a handset
You can add new handsets ( CS6609, purchased separately) to your telephone
system. Each handset must be registered with the telephone base before use.
When first purchased, each expansion handset displays To register HS and
See manual alternately. You may need to charge the handset before registering
it to the telephone base.
To register a handset to a CS6619/CS6629 base:
Place the new (non-registered) handset in the telephone base.
After about 0 seconds, the handset displays Registering... When the
registration process completes, the handset displays Registered and you hear
a beep. The registration process takes about 90 seconds to complete.
To register a handset to a CS6648/CS6649 base:
On the telephone base, press and hold FIND HANDSET for about four seconds
until the IN USE light turns on and then it shows Registering...
On the cordless handset, press QUIET
#
then it shows
Registering... Both the telephone base and cordless
handset show Registered and you hear a beep when the
registration process completes. The registration process
takes about 60 seconds to complete.
Deregister handsets
If you want to replace a handset or reassign the designated handset number of
a registered handset, you must deregister all the handsets and then individually
register each handset.
To deregister all handsets from a CS6619/CS6629 base:
Press and hold FIND HANDSET on the telephone base for about 0 seconds
until the IN USE light on the telephone base turns on and starts to flash.
Immediately press FIND HANDSET again. You must press FIND HANDSET
while the IN USE light is still flashing. The IN USE light flashes for approximately
five seconds.
All handsets display
To register HS and See manual alternately when the
deregistration process completes. The deregistration process takes about
0 seconds to complete.
To deregister all handsets from a CS6648/CS6649 base:
Press and hold FIND HANDSET on the telephone base for about 0 seconds
until the telephone base shows Registering... then De-register? The IN USE
light flashes.
Immediately press and release
MENU/SELECT. The telephone base displays
Please wait.
All handsets show
To register HS and See manual alternately when the
deregistration process completes. The deregistration process takes about
0 seconds to complete.
.
.
.
.
.
.
3.
.
.
3.
CS6619 base CS6629 base Do not place the handset
in the charger.
CS6648/CS6649 base Before registration, make
sure the handset is not
placed in the charger.