Technical specifications – VTech DS6751_-2-3 Abridged manual User Manual

Page 16

My telephone does not work at all.

Make sure the battery is installed and charged correctly. For optimum daily performance,

return the handset to the telephone base or handset charger after use.

Make sure the power adapter is securely plugged into an outlet not controlled by a wall switch.

Make sure the telephone line cord is plugged firmly into the telephone base and the wall jack.

Unplug the electrical power to the telephone base. Wait for approximately 5 seconds, then plug it

back in. Allow up to one minute for the cordless handset and telephone base to synchronize.

Charge the battery in the cordless handset for at least hours. For optimum daily

performance, return the cordless handset to the telephone base or handset charger after use.

If the battery is completely depleted, charge the cordless handset for at least 30 minutes

before use.

Remove and install the battery again. If that still does not work, it may be necessary to

purchase a new battery.

Disconnect the telephone base from the telephone wall jack and plug in a working

telephone. If the other telephone does not work, the problem is probably in the wiring or

telephone service. Contact your telephone service provider.

I have accidentally set my handset/telephone base LCD language to Spanish or French,

and I don’t know how to change it back to English.

While the handset/telephone base is not in use, press

MENU, then enter 364

While the handset is on a call, press

MENU, then enter 364

. The call ends.

The answering system does not record messages.

Make sure the answering system is on.

Make sure the memory of the answering system is not full. When the answering machine

memory is full, it does not record new messages until some old messages are deleted.

If you subscribe to voicemail service, change the number of ring so that your answering

system answers before your voicemail answers. To determine how many rings activate

your voicemail, contact your telephone service provider.

If there is a fax machine connected to the same telephone line, try disconnecting the

fax machine. If that solves the problem, consult your fax machine documentation for

information on compatibility with answering systems.

Common cure for electronic equipment.

If the telephone is not responding normally, put the cordless handset in the telephone base.

If this does not fix the problem, do the following (in the order listed):

Disconnect the power to the telephone base.
Disconnect the battery on the cordless handset.
Wait a few minutes before connecting power to the telephone base.
Install the battery again and place the cordless handset in the handset charger.
Wait for the cordless handset to synchronize with the telephone base. Allow up to one

minute for this to take place.

•

.
2.
3.
4.
5.

Technical specifications

Frequency control

Crystal controlled PLL synthesizer

Transmit frequency

DECT frequency: 92.536-92.44 MHz

Bluetooth frequency: 2402.000-240.000 MHz

Channels

DECT channel: 5

Bluetooth channel: 79

Nominal effective

range

Maximum power allowed by FCC and IC. Actual operating range may vary

according to environmental conditions at the time of use.

Power requirements

Handset: 2.4V Ni-MH battery

Telephone base: 6V DC @ 400mA

Charger: 6V AC @ 300mA

Memory

Directory: 200 memory locations; up to 30 digits and 15 characters

Caller ID log: 50 memory locations; up to 24 digits and 15 characters

The ENERGY STAR

program (www.energystar.gov) recognizes and encourages the

use of products that save energy and help protect our environment. We are proud to

mark this product with the ENERGY STAR

label indicating it meets the latest energy

efficiency guidelines.

Telephones identified with this logo have reduced noise and interference when

used with most T-coil equipped hearing aids and cochlear implants. The TIA-03

Compliant Logo is a trademark of the Telecommunications Industry Association.

Used under license.

Compatible with

Hearing Aid T-Coil

TIA-1083

The

Bluetooth

word mark and logos are owned by Bluetooth SIG, Inc. and any use of such

marks by VTech Holdings Limited is under license. VTech Holdings Limited is a member of

Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.

VTECH TELECOMMUNICATIONS LTD.

A member of THE VTECH GROUP OF COMPANIES.

Distributed in the U.S.A. by VTech Communications, Inc., Beaverton, Oregon 9700.

Distributed in Canada by VTech Technologies Canada Ltd., Richmond, B.C. V6W L5.

VTech is the registered trademark of VTech Holdings Limited.

9-007247-020-00