VTech FS6224_-2-21-3 Abridged manual - Manual (Page 8)

8
Caller ID
This product supports caller ID services provided by most telephone service
providers. Depending on your service subscription, you may see the caller’s name,
number, date and time of calls that are sent by your telephone service provider after
the first or second ring.
Caller ID log
The caller ID log stores up to 30 entries. If you answer a call before the caller
information displays, it will not be saved in the caller ID log.
The handset displays XX missed calls when you have incoming calls that have
not been answered.
If you want to erase the missed call indicator, press and hold
CANCEL on the
idle handset.
To review and dial a number in the caller ID log:
Press CID when the handset is not in use.
Scroll to browse through the caller ID log. When the desired entry appears:
Press # repeatedly to show different dialing options.
Press 1 repeatedly if you need to add or remove in front of the
telephone number.
Press to dial.
To save a caller ID log entry to the directory:
When the desired caller ID log entry displays, press SELECT.
Use the dialing keys to modify the number, if necessary. Then press SELECT.
Use the dialing keys to modify the name, if necessary. Then press SELECT.
To delete caller ID log entries:
Delete an entry: When the desired caller ID log entry displays, press DELETE.
Delete all entries: Press MENU when the handset is not in use. Scroll
to Caller ID log and then press SELECT. Scroll to Del all calls then press
SELECT twice.
About answering system and voicemail
Your telephone has separate indicators for two different types of voice messages:
those left on the built-in answering system and those left at your telephone service
provider’s voicemail. Each alerts you to new messages differently.
If and XX new messages display on the handsets and the message
window on the telephone base flashes, there are messages recorded on
the built-in answering system. It can record and store up to 99 messages,
depending on the length of each message. Each message can be up to three
minutes in length. The total storage capacity for the announcement, messages
and memos is approximately 4 minutes.
If and
New voicemail display on the handsets, your telephone service
provider is indicating that it has new voicemail for you. Contact your telephone
service provider for more information on how to access your voicemail.
Answering system settings
Default settings are indicated by asterisks (*).
Menu setting Description Options
Call screening Set whether you hear the callers while they are
leaving messages to you.
On*
Off
# of rings Set the number of times the telephone rings
before the answering system answers. Toll
saver allows you to check for new messages
and avoid paying unnecessary long distance
charges when you are not calling from your
local area.
6
5
4
3*
2
Toll saver
Remote code Set a two-digit security code to access the
answering system remotely from any
touch-tone telephone.
19*
Msg alert tone Set whether the telephone beeps every
0 seconds to alert you of new messages.
On
Off*
Recording time Set the recording time for each incoming
message.
3 minutes*
2 minutes
1 minute
•
•
.
2.
•
•
3.
.
2.
3.
•
•
•
•