VTech LS6305 Manual - Manual (Page 5)

Getting started
ChArGe
light
Battery installation
Install the battery as shown below.
If the battery compartment cover is on the handset, press on the grooved
tab and slide the cover to remove.
Plug the battery connector securely into the socket inside the handset
battery compartment, matching the color-coded label.
Place the battery with the label
ThIS SIDe UP facing up and the wires
inside the battery compartment.
Align the cover flat against the battery compartment, then slide it towards
the center of the handset until it clicks into place.
Charge the handset by placing it in the telephone base or charger. The
ChArGe light is on when the handset charges.
1.
2.
3.
4.
5.
1 3 2
4 5
If the handset will not be used for a long time, disconnect and remove the
battery to prevent possible leakage.
To purchase replacement batteries, visit our website at
www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or dial 1 (800) 267-7377.
•
•
2
Getting started