VTech DS6511_-15-16-2-3-4A Manual - Manual (Page 9)

Getting started
5
Installation options
Your telephone base is ready for tabletop use. If you want to mount your telephone
on a wall, use the provided wall mount bracket to connect with a standard dual-
stud telephone wall mounting plate. If you do not have this mounting plate, you
can purchase one from many hardware or consumer electronics retailers. You may
need a professional to install the mounting plate.
Tabletop to wall mount installation
If you have already installed the telephone for tabletop use, unplug the telephone
line cord from the telephone wall jack, and unplug the telephone base power
adapter from the wall outlet. Remove the telephone line cord and the power
adapter cord from the grooves.
1.
Route the telephone line cord through the rectangular hole on the wall mount
bracket and plug it into the telephone wall jack. Route the power cord out of the
telephone base and plug it into an electrical outlet not controlled by a wall switch.
2.