V-Tech G21 Manual - Manual (Page 8)

6.Settings
Ring tone setting
Date and time setting
Monitor time setting
Change password
• User call tone, door station call tone,GL call tone can be set different ring tone to distinguish
different calling
• Touch " User Setup" icon on main menu page, then touch " Call Tone Setup ", total 6
pieces ring tones will be displayed
• Touch "Ring Type" icon to switch to set User call tone, door station call tone,GL call tone
• Touch "Louder Volume" to select a louder ring tone volume.
• Touch " User Setup" icon on main menu page, then touch " Clock ", a digital keypad will be
shown on screen
• Input the date and time by touching the digital keypad, press " * " key to select the digit, press
" # " key to save the settings.
• The date format can be set to DD/MM/YY or MM/DD/YY, touch "Date Format" icon to switch
date format setting
• The time format can be set to 24 hours or 12 hours format, touch "Time Format" icon to
switch time format setting
• To see the current date and time, touch the screen anywhere once in standby mode to open
the calendar page. or enter the status bar.
• Touch " User Setup" icon on main menu page, then touch " Monitor Time Set ", a digital
keypad will be shown on screen
• Input the monitor time by touching the digital keypad, press " * " key to select the digit, press
" # " key to save the settings.
• A password will be asked before enter Menu Upgrade ,Event clear and Restore to default
page, the default password is 1234
• Touch " User Setup" icon on main menu page, then touch " Password Setup ", a digital
keypad will be shown on screen
• Input the old and new password by touching the digital keypad, press " * " key to select the
digit, press " # " key to save the settings.