V-Tech DT47 Manual - Manual (Page 5)

[ 00 ] Jim. Zhang
[ 01 ] Calo. Liu
[ 02 ] Jacko. Zhang
[ 03 ] Philips. Chen
[ 04 ] Hebe. Zhang
[ 05 ] Tony. Li
2. Inner Call : If multi slave monitors are installed in the same apartment, select Inner
Call, all the other Monitors will ring at the same time, whichever Monitor answers
the call, conversation is started.and the other monitors will stop ringing at the same
time.
3. Direct Dial Guard unit : A Monitor can be assigned as Guard Unit Monitor; when the
Guard Unit Monitor answers the call, conversation with the guard person is started..
6. Picture Memory
Note: the picture memory function will be activated only when the system connect
SC6M module, otherwise, this function is unvalid in normal. For more information,
please refer to SC6M user instruction in detail.
Picture Recording
Both Auto-Recording and Manual-Recording are available.and Auto-Recording is
default. If receive a call , after 3s, the monitor will record one picture for each calling
automatically. Or you can touch Capture icon to record the visitor's image manually
when the monitor is in monitoring or calling.
5. Intercom Function
1. Intercom by namelist : User in one apartment can call other apartments in the
system. Touch Intercom item on main menu page , then touch Intercom
by Namelist icon (the namelist will be created automatically by the system). Select a
name on the screen then touch Dial Number icon to call.Press / icon to
enter last/next name list page. (Touch Dial Number icon again to redial)
-4-