V-Tech DT47 Manual - Manual (Page 4)

4. Basic Door Release Operation
1. Press CALL button on outdoor station, the
Monitor rings, at the same time, the screen
displays the visitors' image.
2. Press TALK/MON Button on monitor or
touch icon on screen, you can communicate
hands free with the visitor for 90 seconds.After
finishing communication,press TALK/MON button again or touch
icon to
end the communication. If nobody answers the phone, the screen will be turned off
automatically after 30 seconds.
3. During talking state, Press UNLOCK Button or touch icon to open the door
for the visitor.(if two locks are connected to door camera,touch unlock 2nd
icon to release the second lock )
4. When the monitor is in standby mode, press TALK/MON Button(or touch
Monitor item on main menu page), The screen can display the view of outside.
Or touch
Manual Monitor icon on main menu to get into the door camera
switching mode, if multi door stations are installed, you can press the door 1/2/3/4
to monitor the door station or CCTV camera you want.press Home icon to exit
and enter main menu page.
DS-1 00:30
CAM-1 00:30
Note: if the system connect 2 wire camera
via camera controller, press the camera
1/2/3/4 to monitor the camera you want.
press Home icon to exit and enter main
menu page.
-3-