V-Tech DT27_TD7 Manual - Manual (Page 4)

DS-1 00:23
3
Monitor Select
Exit Home
Camera 1 ...
Camera 2 ...
Camera 3 ...
Camera 4 ...
Monitor Time Set ...
5. Intercom Function
Touch Intercom item on main menu page,there are
three items:Intercom Call...,Inner Call ...,Direct Call
Guard Unit...
Exit Home
Intercom
Intercom Call ...
Inner Call ...
Direct Call Guard Unit ...
4. Basic Door Release Operation
1. Press CALL button on outdoor station, the
Monitor rings, at the same time, the screen
displays the visitors' image.
2. Press TALK/MON Button on monitor or touch
icon on screen, you can communicate hands
free with the visitor for 90 seconds.After finishing
communication,press TALK/MON button again
or touch icon to end the communication. If nobody answers the phone, the
screen will be turned off automatically after 30 seconds.
3. During talking state, Press UNLOCK Button or touch or icon to open the
corresponding door for the visitor.
4. When the monitor is in standby mode, press TALK/MON Button(or touch
Monitor ... item on main menu page), The screen can display the view of outside.
If multi door stations are installed, touch
icon to get into the camera switch
mode(or direct touch Manual Monitor item on main menu page). You can
touch camera 1/2/3/4 to monitor the door station or CCTV camera you want.See
the following diagrams.(Press TALK/MON button again touch icon to end
monitoring.)
DS-1 00:23