V-Tech DT27_TD7 Manual - Manual (Page 3)

2
2. Monitor Mounting
145~160 cm
1. Use the screws to fix the Mounting Bracket on the mounting box.(fitting accesories
includes a Bracket (Two pieces of 4X25 screws are needed for fastening the
Mounting Bracket), Special 2 wire cables to connect with Monitor)
2. Wire the system correctly(see the later connection chapter) then hang the Monitor
on the Mounting Bracket firmly.
3. Main Menu
1. Touch the screen anywhere on monitor in standby mode, the date/time page will be
showed. (the date/time page will be closed in 1 minute if no operation)
2. Touch the screen again, main menu page will be showed as follows.
Main Menu
About i
Monitor ...
Manual Monitor
Intercom
User Setup
Close
22/04/2011 Fri.
11 : 44
AM