V-Tech DMR18 Manual - Manual (Page 16)

Card information:
Format:
Enter Card Information page, and the
screen will display the authorized User
Cards count, and card read access
events count.
Enter Card Format page, a password
will be asked,input 8 digits installer
password (66666666 by default),then
press" #" key to save,format operation
is activated.all card information will be
cleared.
4 . C a r d s I n f o r m a t i o n
* Back # Save
Card Count: 1000
5 . F o r m a t
* Back # Save
Please Input Password
[ - - - - - - - - ]
11. Change Door Station Language:
It's convenient to change the user interface for DMR18.Just put the config files to the SD card
and by means of the digital keypad of door station,only 30 seconds is needed to update.
L1
T/R -
CN-LK
T/R+
J/KMB JP-LK
Bus
Insert SD card
SD Card Slot
EB+ EB- N.O LK+ LK- +12V
L2
1 2 3
1 2 3
Step 1: Insert the SD card which is
contained config files into the SD card slot
where is at the back of the door station.
Refer to the right diagram.
Step 2:
If door station runs as Debug State, you can press “1#” to activate Tools Menu, select “2” to
enter setup page,then select 1 item.If it runs as Normal State, follow these steps:
-15-