Velleman PCS100A pcs100 - pcs500 - k8031 - Manual (Page 5)

PCS500 / PCS100 / K8031
5
Minimum system requirements
•
IBM compatible PC
•
Windows 95, 98, ME, (Win2000 or NT possible)
•
SVGA display card (min. 800x600)
•
Mouse
•
Free printer port LPT1, LPT2 or LPT3
•
CD Rom player
Options
•
Insulated measurement probe x1 / x10: PROBE60S
•
Soft carry case: GIP
Technical data
PCS500 Oscilloscope
•
Time base: 20ns to 100ms per division
•
Trigger source: CH1, CH2, EXT or free run
•
Trigger level: adjustable in whole screen
•
Input sensitivity: 5mV (10mV for PCS100 / K8031) to 15V/division
•
Record length: 4096 samples / channel
•
Sampling frequency: Real time* 1.25 kHz to 50 MHz
•
Sampling frequency: Repetitive*: 1 GHz (Equivalent Sampling Rate)
PCS100 / K8031 Oscilloscopes
•
Time base: 0.1us to 100ms per division
•
Trigger source: CH1 or free run
•
Trigger level: adjustable per ½ division
•
Input sensitivity: 10mV to 3V per division
•
Record length: 4079 samples
•
Sampling frequency: Real time* 800Hz to 32MHz
PCS500 / PCS100 / K8031 general data
•
Trigger edge: rising or falling
•
Step markers for voltage, time and frequency
•
Interpolation: linear or smoothed
•
Vertical resolution: 8 bit
•
Auto setup function
•
True RMS readout (only AC component)
(*) Real-time Sampling:
A sampling mode in which the picture is build by collecting as many samples
as it can as the signal occurs.
(*) Equivalent Sampling rate:
A sampling mode in which the picture is builds using repetitive signals by
capturing information from each repetition.