Velleman PCSU1000 RECORDER - Manual (Page 6)

Waveform Recorder Help 5
© 2005 ...Velleman
AutoSave Data
Saves all next screens of data in text format to a file.
The AutoSave function will be activated after the Run button is pressed.
The AutoSave function will be finished after the Run button is pressed again.
Note: Every screen saved takes about 20kB of disk space
Save Settings
Saves the Oscilloscope, Spectrum Analyzer and Transient Recorder settings to a file. Also
Function Generator settings (frequency, amplitude, offset and duty cycle) are stored to the file.
Recall Settings
Loads a previously-stored settings file to the oscilloscope.
Print
Prints the image.
You can edit the image caption.
Print Setup
Selects a printer and sets printer options before printing. The available options depend on the
printer you select.
Exit
Terminates the program.
2.2 Edit Menu
Copy
Copies the image to the Windows' clipboard.
Paste
Pastes the image residing in Windows' clipboard to the screen
2.3 Options Menu
Colors
· Select the color for various items on the waveform display.
· To change the color of an item, click the corresponding button. This will open a dialog in which
you can select the new color.
· Full color selection is possible only if True Color (24 bit) palette is used.
· There are restrictions in the color combinations with other palettes.
· Click either of the Default Colors button to resets all colors to the default settings.
· The same color settings will be on the Oscilloscope and Spectrum Analyzer dispaly too.
.
2.4 View Menu
Markers
Displays Markers on the screen.