English – Vitek VT-3523 User Manual
Page 5
WAKING UP TO THE RADIO
Set the alarm time as
instructed above.
Set the Auto/Off/On (1)
selector to the On position.
Set the band selector to the
desired band - AM/FM, use
the TUNING dial to tune to
the desired radio station and
make sure that the volume is
set properly.
Set the Auto/Off/On (1)
selector to Auto. At the set
alarm time the radio will auto-
matically activate.
WAKING UP TO BUZZER
ALARM
Set the alarm time as indicat-
ed above.
Rotate the VOLUME (12) dial
counter-clockwise until it
clicks in order to activate the
BUZZ alarm mode.
Set the Auto/Off/On (1)
selector to Auto. The buzzer
alarm will activate at the set
alarm time.
TURNING OFF THE ALARM
To turn off the alarm, press
the AL OFF (5) button once;
the alarm will turn off and the
set alarm time is saved for
the next day.
To turn the alarm off com-
pletely, set the Auto/Off/On
(1) selector to the Off posi-
tion.
SNOOZE FUNCTION
You can temporarily silence
the alarm (buzzer or radio) by
pressing the Snooze (9) but-
ton; the alarm will automati-
cally activate again in 9 min-
utes.
SLEEP TIMER
Set the Auto/Off/On (1)
selector to the Auto position.
Press the SLEEP (7) button;
the radio will activate and the
timer will begin counting
down from 59 minutes until
radio shut-off.
To change the shut-off time,
press and hold the SLEEP (7)
button and then use the MIN
(3) button to set the desired
shut-off time from 59 to 1
min.
Press the Snooze (4) button
to deactivate this function.
RADIO
AM band reception uses an
internal antenna; when tuning
a radio station, turn the radio
itself in order to achieve opti-
mal reception.
For best reception in the FM
band, make sure that the FM
antenna wire is fully extend-
ed.
Set the ON/OFF/AUTO (1)
button to the ON position.
Set the desired volume using
the VOLUME (12) dial.
4
ENGLISH
3523_14.qxd 16.03.05 13:31 Page 4