Ohaus RANGER COMPACT COUNTING SCALES Data Sheet - Manual (Page 3)

Ranger Count Plus
Adding to the most of the features found in the Ranger Count, the Ranger Count Plus includes enhanced memory
and features for supporting more demanding counting applications:
High-Precision Loadcell
The Ranger Count Plus is based on a high-precision MFR loadcell, providing lab balance resolutions with industrial
counting software and housings.
Counting Modes
The Ranger Count Plus supports both Counting and Count Checking. The Ranger Count Plus can count into and
out of an empty container, and the Ranger Count Plus can be set to notify the user when the count in the container
is within a set range of pieces, allowing fast packaging operation. The Ranger Count Plus includes software to
ensure optimization of the APW sample (accuracies of 97.5%, 99% and 99.5%) and can also be set to continue to
optimize the APW during the counting process. Set sample sizes and variable sample sizes can be used, and the
Ranger Count also can be set to clear the APW between containers.
100 Memory Locations
The Ranger Count Plus also features 100 memory locations for storing information by ID number for tare weights,
APWs and reference quantities for target weights and target quantities.
Multiple Weighing Modes
For use in a range of industrial applications, the Ranger Count includes software for Filling/Dosing, Dynamic
Weighing, Count Checking (ensuring a part count is within a set limit), Checkweighing (ensuring a weight is with-
in a set limit), and Accumulation/Totalization using the dedicated +/- key.
Two-Scale Counting
The Ranger Count can support two-scale counting to other Ranger scales via RS232.
Other Standard Features
Selectable settings for auto-zero tracking, retain zero and tare when off, chain tare, auto tare, clear auto tare,
averaging and stability levels, backlight, sleep mode and auto-off timer, RS232 settings, print mode and command
sets (Ohaus, MT-SICS and Toledo Continuous). Ranger Count Plus also supports time/date with LCD display and
GMP/GLP-compliant data output, as well as selectable key beep.
Compliance
• Electrical/Emissions: CE listed, meets AS/NZS4251.1 Emission/AS/NZS4252.1 Immunity, FCC Class B Part 15
operation, Industry Canada Class A. cULus AC power pack. Compliant to Directive 2002/96/EC on waste
electrical and electronic equipment (WEEE).
• Legal-for-Trade: NTEP Certified (weighing function only – certificate #07-026, Class II for Ranger Count Plus,
Class III for Ranger Count), OIML R76 Class III and EC Type Approved.
• Quality: Ohaus quality management system registered to ISO 9001:2008
Ranger
TM
Series
High Precision Industrial Counting Scales