Naxa NPB-257 User Manual
Page 3
Note:
To ensure good system performance, wait until the disc tray completely reads the disc
before proceeding.
If no disc is loaded into the compartment, or the disc is placed upside down, the display will
show NOd.
PLAYING A DISC
1. Press the PLAY/PAUSE/USB button to start playback.
The playback starts from track 1, the “ ” indicator is shown on the display.
To interrupt playback, press the PLAY/PAUSE/USB button. The “ ” indicator will flash on
the display.
To resume playback, press the PLAY/PAUSE/USB button again.
2. To stop playback, press the STOP
button, the total number of tracks appears
on the
display.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
Press the CD NEXT or BACK button repeatedly in the stop mode or during play until the
desired track appears on the display.
Press the PLAY/PAUSE/USB
button to start play.
To search for a particular passage during playback
(track scanning at high speed)
Press and hold the CD NEXT or BACK button to scan the current playing track at high speed
until desired point passage, and then release the button. Playback will start again from this
point.
To select a song which track number exceeds 10 (for MP3 disc only)
To select a song/track which number exceeds 10, Press the FOLD+/+10 button each time to
skip forward/backward 10 tracks, then press the NEXT or BACK button to select desired track.
For example: to select the 17
th
track, press FOLD+/+10 button, and then the NEXT
button six
times immediately.
To Select A Desired Folder (for MP3 disc only)
Note:(if the MP3 disc contains more than one folder)
Press and hold the FOLD+/+10 or FOLD-/-10 button more than 1 second to skip next/previous
folder. Until the desired folder number appears on the LCD display, then release the button,
PROGRAM TRACKS
Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks /MP3
99 tracks can be stored in the memory in any order.
1. In the stop mode, press the PROG./P-MODE button, the PROGRAM will flash and the
P01
will be show on the display.
2. Press the CD NEXT or BACK button to select the first desired track to be programmed.
3. Press the PROG./P-MODE button to enter. The display changes to show
P02
.
4. With MP3 disc,keep pressed FOLD-/-10 or FOLD+/+10 button to select the desired album.
5. Repeat steps 2 & 3 to store other desired tracks for CD until all tracks are programmed.
Repeat steps 2,3 & 4 for MP3.
6. Press the PLAY/PAUSE/USB button to start playback from the first programmed track.
7. Press the STOP button to stop program playback.
To Erase the Memory (Program)
To clear the program, you have two options:
1. Press the STOP button when the disc is stopped, or
2. Open the CD compartment lid, program will be erased.
REPEAT PLAY
To Repeat a Single Track
1. Press the PROG./P-MODE button once in the play mode, “REPEAT” will flash on the display.
The current track will be played repeatedly until the STOP button is pressed
2. Press the PROG./P-MODE button until the “REPEAT” disappear.
To repeat all the Tracks
1. Press PROG./P-MODE button twice in the play mode, “REPEAT” shows steady on the
display, all tracks on the disc will be played repeatedly until the STOP button is pressed.
2. To cancel repeat play, press the PROG./P-MODE button till the “REPEAT” disappear.
To repeat current Directory (for MP3 only)
1. Press PROG./P-MODE button third in play mode, “REPEAT FOLDER ” shows steady on
the display, The current directory will be played repeatedly until the STOP button is
pressed.
2. Press the PROG./P-MODE button till the “REPEAT FOLDER ” disappear.
RANDOM PLAY
Press the PROG./P-MODE button in the play mode till the “RANDOM ” shows steady on the
display, the random play will start from next track automatically(or press CD skip forward
button), until all tracks are played over and then stop. Press the PROG./P-MODE button once
to cancel.
INTROSCAN PLAY
（
for CD disc only
）
Press the PROG./P-MODE button in the play mode till the “INTRO ” shows steady on the
display, the unit will start to play the first 10 seconds of music of each track , until all tracks are
played over and then stop. Press the PROG./P-MODE button once to cancel.
LISTENING TO USB
USB PLAYBACK
The USB input jack is compatible with a data flash memory key, it is not guarantee the
compatibility with MP3 players with proprietary software.
1. Press and hold the PLAY/PAUSE/USB button to select USB playing mode while the
FUNCTION switch on main unit is set to CD/MP3/USB position.
2. Connect the USB to the USB INPUT. The CD will display total number of tracks stored
inside the USB.
3. Press the PLAY/PAUSE/USB
button to start playing. Press the PLAY/PAUSE/USB button
once again to temporarily stop.
4. Press the STOP button to stop playing. The display will show total number of tracks.
5.
The function are the same as per MP3 playback.
6. To exit USB operation, press and hold PLAY/PAUSE/USB button to return the CD mode.
4
5