Naxa ND-851 - Manual (Page 11)

-10-
Playback of a DVD:
1. Connect the Player to the TV as previous procedures.
2. Insert the small plug from the supplied AC/DC Adaptor to the DC IN Jack on the rear of Player.
Insert the AC/DC Adaptor into a conveniently located AC outlet having AC 100-240V~, 50/60Hz. The Red
Standby Indicator on the front cabinet will turn on.
3. Press the
button on the Player or Remote Control to turn on. The color of STANDBY LED
indicator on the front cabinet will turn to green.
4
. Press the Open/Close ( ) button to open the disc tray. Place the disc on the center of tray with
label side face up. Closed the tray by press the Open/Close ( ) button. The unit will start
playback automatically.
DVD PLAYBACK OPERATIONS
6. Press STOP button to stop playback. The player will remember the point where disc was stopped. Press
Play/Pause button again, playback will start from this point. To stop playback completely or to start again
from the beginning, press STOP
button twice.
7. To power off, press the button to turn off the player. The color of the STANDBY LED indicator
will turn to red.
NOTE: If the player will not be used for a long period of time, power off the player by unplugging
the AC/DC adaptor from the wall outlet.
5. During playback:
~ Press the or buttons repeatedly to fast search for a specific section forward/backward.
Press Play/Pause button to resume normal playback.
~ Press the or buttons repeatedly to skip to specific track/chapter.
~ Press Play/Pause button to pause, press Play/Pause button to resume playback.
Slow motion playback:
During playback, press the SLOW button repeatedly to set the slow motion speed. Press Play button to
resume normal playback.
Repeat Playback:
During playback, press the REPEAT button once; “CHAPTER” will appear on the screen then the current
Chapter will playback repeatedly and continuously.
Press the REPEAT button twice; “TITLE” will appear on the screen then the current Title will playback
repeatedly and continuously.
Press the REPEAT button three times; “ALL” will appear on the screen then all the tracks on the disc will
playback repeatedly and continuously.
Press the REPEAT button repeatedly until "OFF" appear on the screen to turn off repeat mode.
OPERATIONS
TIME
Press the TIME button once, the Title/Chapter selection menu will appear on the screen. Use the
Direction / or numeric buttons to select or enter the number of the desired Title/Chapter. Press the
ENTER button to start playback of the selected chapter.
Press the button twice. The time selection menu will appear on the screen, enter the desired TIME
time by pressing the numeric buttons then press the ENTER button. The player will play the movie starting at the
selected time.
A-B Repeat Playback:
During Playback, press the A-B button to define where you want the section to start. Press the A-B
button again to define where you would like the section to end, the unit will then play the selected section
repeatedly and continuously. Press the A-B button again to resume normal playback.
Note: This function is not available on all discs.