English – MAXWELL MW-3012 W User Manual

Page 10

ENGLISH

that it is turned off and has cooled
completely.

• Wipe the iron's outer surface with a

damp cloth and then wipe dry.

• Sediment on the iron soleplate can be

removed with a cloth soaked in vin-
egar-water solution.

• After removing sediment, polish the

soleplate with a dry cloth.

• Do not use abrasive substances to

clean the soleplate and body of the
iron.

• Avoid touching the iron soleplate with

sharp metal objects.

STORAGE
• Turn the temperature regulator (5) an-

ticlockwise till the “0” position.

• Remove the plug from the socket.
• Open the water tank lid (4), turn over

the iron and drain any remaining water
from the water tank (6). Close the lid
(4).

• Set the iron vertically and allow it to

cool completely.

• Wind the power cord.
• Keep the unit vertically in a dry cool

place, out of reach of children.

Delivery set
Iron– 1 pc.
Water tank – 1 pc.

TECHNICAL CHARACTERISTICS
Power supply: 220-240 V ~ 50 Hz
Maximal power consumption: 1000 W

Specifications subject to change without
prior notice.

Service life of appliance - 3 years.

GUARANTEE
Details regarding guarantee conditions

can be obtained from the dealer from
whom the appliance was purchased. The
bill of sale or receipt must be produced
when making any claim under the terms
of this guarantee.

This product conforms to the
EMC-Requirements as laid
down by the Council Directive
89/336/EEC and to the Law
Voltage Regulation (73/23
EEC)

MW-3012.indd 10

30.11.2010 14:09:09