Manhattan 179195 Hi-Speed USB to SATA_IDE Adapter - Manual - Manual (Page 6)

6
2. In the left-hand file directory, click/select “Disk Management” so its screen
displays on the right. Right-click on the disk identified as “Unallocated,” then
click/select “New Partition...” from the pop-up menu. NOTE: To confirm that the
drive you’ve placed in the enclosure is indeed the unallocated disk, disconnect
the USB cable and see if the corresponding “Unallocated” text disappears.
3. With the Format Partition screen displayed, select your preferred settings, then
click “Next” to continue.