Lynn Electronics MC-SFP-MM-550M - Manual (Page 2)

www.lynnelec.com
MC-SFP-MM-550M
850 nm Multi-mode Transceiver
Small Form Pluggable (SFP), 3.3 V
1.0625Gbd Fiber Channel/1.25 Gigabit Ethernet
Fiber Type 62.5/125 50/125
TEC Opitx Solutions
Division of Lynn Electronics Corp.
154 Railroad Drive • Ivyland, PA. 18974
800-523-6075 • fax 215-364-2944 • email: [email protected]
Recommended Operating Conditions
PARAMETER SYMBOL MIN MAX UNITS NOTE
Ambient Operating Temperature T
AMB
0 70
°C
Supply Voltage Vcc 3.1 3.5 V
Supply Current I
TX
+ I
RX
--- 300 mA
Transmitter Electro-optical Characteristics
Vcc = 3.1 V to 3.5 V, T
A
= 0
°C to 70 °C
PARAMETER SYMBOL MIN TYP. MAX UNITS NOTE
Output Optical Power
(50/125
μm fiber, NA=0.20)
(62.5/125 μm fiber, NA=0.275)
P
out
9.5 --- -4 dBm
Extinction Ratio ER 9 --- --- dB
Coupled Power Ratio CPR 9 --- --- dB
Center Wavelength
C
830 850 860 nm
Spectral Width (RMS) --- --- 0.85 nm
Rise/Fall Time, (20 80%) T
r
,
f
--- --- 260 ps
Relative Intensity Noise RIN --- --- 117 dB/Hz
Total Jitter TJ --- --- 227 ps
Output Eye Compliant with IEEE802.3z
Max. P
out
TX-DISABLE Asserted P
OFF
--- --- 35 dBm
Differential Input Voltage V
DIFF
0.65 --- 2.0 V
Transmit Fault Output-Low TX_FAULT
L
0.0 --- 0.5 V
Transmit Fault Output-High TX_FAULT
H
2.4 --- V
CC
V
TX_DISABLE Assert Time t_off --- --- 10 μs
TX_DISABLE Negate Time t_on --- --- 1 ms
Time to initialize, include reset of
TX_FAULT
t_init --- --- 300 ms
TX_FAULT from fault to assertion t_fault --- --- 100 μs
TX_DISABLE time to start reset t_reset 10 --- --- μs