Land of Nod VERONA CRIB - Manual (Page 7)

corner-holes
C
7
8
Back
The MATTRESS SUPPORT PANEL may be installed in one of four positions. See the four
different mattress support holes in each corner of the CRIB. First, select the desired mattress
height. Then, unscrew the MATTRESS SUPPORT PIN from each MATTRESS SUPPORT
BOLT . Insert the smooth ends of each MATTRESS SUPPORT PIN in the desired
mattress support holes on END RAILS . See drawing for proper pin orientation.
Carefully lower MATTRESS SUPPORT PANEL with labels facing up.
Align corner holes to sit on MATTRESS SUPPORT PINS .
Tighten bolts all the way.