Land of Nod VERONA CRIB User Manual
Page 5
base connector holes
base connector holes
G
J
L.2
K.2
base connector holes
Back
J
B
I
A.1
mattress support holes
A
Place END RAIL onto BASE with mattress support holes facing the bottom and inside of crib.
Secure END PANEL to BASE with BASE CONNECTOR BOLTS , LOCKING
WASHERS , and REGULAR WASHERS from underneath as shown below.
Place other END RAIL on the opposite side with mattress support holes facing the bottom and
inside of crib. Secure END RAIL to BASE with BASE CONNECTOR BOLTS ,
LOCKING WASHERS , and REGULAR WASHERS from underneath as shown below.
Secure SIDE RAIL with BASE CONNECTOR BOLTS , LOCKING WASHERS , and
REGULAR WASHERS from underneath as shown below. Tighten all bolts with ALLEN WRENCH .
4
It may be easier to access the top frame connector holes by laying the frame on its side (place on
a blanket to prevent scraping). Also, only
slightly tighten bolts until all of them are in place and
aligned. Tighten all bolts with ALLEN WRENCH .