Herman Miller SAYL Chairs - Environmental Product Summary - Manual (Page 2)

figure breaks down to 12-percent post-consumer and
2-percent pre-consumer recycled content.
Work Chair, Suspension Back
Work Chair Upholstered
Side Chair
• Every material has been scrutinized down to the
molecular level.
• Steel components contain up to 35 percent recycled
content and are 100 percent recyclable.
• Aluminum components are 100 percent recyclable.
• Plastic components are identified with an ASTM
these materials to the recycling stream.
• No polyvinyl chloride (PVC) used.
• The chair is dematerialized which uses less material
and reduces overall weight.
• Returnable/Recyclable Packaging—Packaging materials
Environmental Product Summary
SAYL
™
Chairs
Work Chair, Suspension Back
Work Chair Upholstered
Side Chair
The SAYL work chairs are up to 91 percent recyclable
at the end of their useful life. The SAYL upholstered
work chairs are up to
89 percent recyclable at the
end of their useful life. The SAYL side chair is up to 86
percent recyclable at the end of its useful life.
The SAYL work chairs are comprised of up to 8-percent
recycled materials. This figure breaks down to 7-percent
post-consumer and 1-percent pre-consumer recycled
content. The SAYL upholstered work chairs are comprised
of up to
9-percent recycled materials. This figure breaks
down to 7-percent post-consumer and 2-percent
pre-consumer recycled content. The SAYL side chair is
comprised of up to
14-percent recycled materials. This
z
2
Y
® Y and Z are among the registered trademarks of Herman Miller, Inc.
TM Eco-Dematerialised, SAYL and 3D Intelligent are among the trademarks of Herman Miller, Inc.
Cradle to Cradle Certified CM is a certification mark licensed by the Cradle to Cradle Products Innovation Institute.
® level is a trademark of BIFMA International.
Global GreenTag CertTM is an Australian Competition and Consumer Commission (ACCC) approved
National Certification Mark.
® GREENGUARD is a registered trademark of the GREENGUARD Environmental Institute.
© 2012 Herman Miller, Inc., Zeeland, Michigan
PLASTIC 47%
STEEL 43%
FOAM 7%
OTHER 3%
PLASTIC 54%
STEEL 40%
FOAM 5%
FABRIC 1%
PLASTIC 55%
STEEL 39%
FOAM 3%
OTHER 3%
POST-CONSUMER
RECYCLED CONTENT 7%
PRE-CONSUMER
RECYCLED CONTENT 1%
POST-CONSUMER
RECYCLED CONTENT 7%
PRE-CONSUMER
RECYCLED CONTENT 2%
POST-CONSUMER
RECYCLED CONTENT 12%
PRE-CONSUMER
RECYCLED CONTENT 2%