Herman Miller Celle Chairs - User Adjustments - Manual (Page 2)

Adjustment Guide 2 HermanMiller Celle ® Chair
Tilt Limiter: Vertical tab under left front side of seat
Only available on some models.
To engage:
Recline and move tab up to define the
limit of recline.
To release:
Lean forward and press tab back.
Engage the tilt limiter when you want to sit in an upright or partially
reclined position.
Lumbar Height: Side edges of lumbar support
Only available on some models.
To adjust:
While seated, grasp side edges of
lumbar support, slide lumbar support
up or down to desired height.
Adjust the lumbar height so that it comfortably supports the natural curve
of your spine.
Lumbar Depth: Knob in center of lumbar support
To increase:
While seated, turn knob clockwise.
To decrease:
While seated, turn knob
counterclockwise.
Adjust the lumbar depth so that it comfortably supports the natural curve
of your spine.
Only available on some models.
Arm Height: Outside lever on top of arm support
Only available on some models.
To adjust:
Raise lever to unlock arm, adjust arm,
release lever to lock.
For maximum comfort, your arms should make contact with the arm pad
without any lift at your shoulders.
Arm Angle: Front of each armpad
Only available on some models.
To adjust:
Grasp front end of armpad and pivot it
inward or outward.
Adjust arm angle inward when using a keyboard; adjust arm angle outward
when using a mouse.
Arm Width: Rear of each armpad
Only available on some models.
To adjust:
Grasp rear portion of armpad and
adjust arm in or out.
In the proper position, your elbows should be in line with your shoulders.