DreamGEAR DGWII-1033 User Manual
Charg ing dock
Charg
ing Dock
Package Contents:
1 - Charging Dock
1 - Pass-thru Power Cable
2 - Rechargeable Battery Packs
PASS-THRU POWER CABLE USE:
1) Connect the Wii AC adapter to the AC recepticle end of the Pass-thru
Cable.
2) Plug mini-USB cord into Charging Dock.
3) Plug power cable to AC recepticle on back of Wii.
2
3
SET-UP/CHARGING:
1) Remove the battery lid on your
Wii Remote and remove any
batteries that may be installed.
2) Replace the original battery
lid with one of the included
rechargeable battery packs.
3) With the Charging Dock
properly connected to your
Wii, place one or two remotes
on to the Charging Dock.
Note: make sure you have
installed the included
rechargeable battery packs
into your Wii remotes.
4) Charging will begin automatically.
The RED LED indicates charging,
the BLUE LED indicates the pack
is fully charged.
5) The Charging Dock charges your
Wii remotes even with Wii console
powered OFF.
- 101 Wireless (8 pages)
- DGWII-3140 (1 page)
- DGWII-1053 (1 page)
- DGWII-3170 (1 page)
- DGWII-1064 (1 page)
- DGWII-3123 (1 page)
- DGPN-464 (1 page)
- DGPSPS-1838 (1 page)
- DG360-1710 (1 page)
- DGPSPS-1829 (1 page)
- DGWII-3161 es (1 page)
- DGPSPS-1807 es (2 pages)
- DGDXL-2699 (1 page)
- DGWII-1095 (1 page)
- DG3DS-4212 (1 page)
- DGWII-1298 es (3 pages)
- DGPS3-1350 (1 page)
- DGPSPS-1801 es (2 pages)
- DGDXL-2698 (1 page)
- DGPSPS-1832 (1 page)
- DGDSI-1943 es (3 pages)
- DG3DS-4233 (1 page)
- DGDXL-2680 es (3 pages)
- DGWII-2815 (1 page)
- DGPSPS-1806 (1 page)
- DGDSL-624 es (1 page)
- DGWII-1281 (1 page)
- DG360-1718 es (1 page)
- DGDSI-2608 es (3 pages)
- DGPS3-3821 es (1 page)
- DGUN-2559 (1 page)
- DGWII-3141 (1 page)
- DGUN-2534 es (2 pages)
- DGWII-1189 (1 page)
- DGWII-1047 (1 page)
- DGDSI-1990 es (2 pages)
- DG360-777 (1 page)
- DG3DS-4254 (1 page)
- DGDSL-905 (1 page)
- DGDXL-2761 (1 page)
- DGWII-3160 (2 pages)
- DGDSI-1941 es (2 pages)
- DGWII-3130 (1 page)
- DGDXL-2684 (1 page)
- DGWIIU-4305 (1 page)