DreamGEAR DGWII-1254 es - Manual

FOR TECHNICAL SUPPORT
PLEASE CONTACT: 1-877-999-DREAM
or [email protected]
BATTERY INSTALLATION:
1. Unscrew the battery compartment door (located on the bottom of
the Quick Shot Plus handle) using a mini-screwdriver (not included).
2. Insert 2 “AAA” batteries and close the battery compartment door.
3. Screw the battery compartment door tightly before using.
NOTE: The power switch next to the battery compartment turns the
LED & Rumble functions of the Quick Shot Plus on and off.
INSTALLING THE WII REMOTE WITHOUT WII MOTIONPLUS:
NOTE: The Quick Shot Plus is not compatible with the Wii Remote Jacket.
Be sure to remove the Wii Remote Jacket before attempting to install.
1. Open both of the orange latches located at the top of the Quick
Shot Plus.
2. Insert the Wii Remote into the Quick Shot Plus by sliding it into the
Wii Remote cradle of the Quick Shot Plus (directional pad end first
with the buttons facing upward).
3. Slide the directional pad end of the Wii Remote until it stops.
4. Close the orange latch that is closest to the “A” button on the Wii
Remote. If you are playing a game that does not require the
Nunchuk, close the second latch and you are ready to play. If your
game requires the use of the Nunchuk, continue to step 5.
5. Through the back opening of the Quick Shot Plus, slip the connec-
tor plug of the Nunchuk under the open latch on the Quick Shot and
connect the Nunchuk to the Wii Remote.
6. Close the orange latch.
NOTE: Please refer to your game’s User’s Guide for button configurations.
INSTALLING THE WII REMOTE WITH WII MOTIONPLUS:
1. Open both of the orange latches located at the top of the Quick
Shot Plus.
2. Insert the Wii Remote into the Quick Shot Plus by sliding it into the
Wii Remote cradle of the Quick Shot Plus (directional pad end first
with the buttons facing upward).
3. Slide the directional pad end of the Wii Remote until it stops.
4. Close the orange latches on the on the Quick Shot Plus. If you are
playing a game that does not require the Nunchuk, you are ready to
play. If your game requires the use of the Nunchuk, continue to step 5.
5. Make sure the connector cover of the Wii MotionPLUS has been
removed and insert the connector plug of the Nunchuk into the
External Extension Connector of the Wii MotionPLUS.
HOW TO REMOVE THE WII REMOTE:
1. If the Nunchuk is attached to the Wii Remote or the Wii Motion-
PLUS, remove the Nunchuk first before trying to remove the Wii
Remote from the Quick Shot Plus.
NOTE: Please refer to the Wii Remote’s User’s Guide for Nunchuk
removal instructions.
2. Open both orange latches on the Quick Shot Plus and lift the Wii
Remote out by the Lock Release buttons on the Wii MotionPLUS.
PACKAGE CONTENTS:
• Quick Shot Plus
• User’s Guide/Warranty Card
• Registration Card