DreamGEAR DGUN-853 it - Manual (Page 5)

SECTION 3
TROUBLESHOOTING (for A/V input system)
Problem Before requesting repair, check the following items:
No picture on
the screen
* Is the Plug ‘N’ Play turned on?
* Is the TV turned on?
* Is the TV on the appropriate AV channel?
* Is the AV output connected properly?
* Check whether the battery capacity is too low.
* Are the batteries properly installed?
Screen flickers or
no color * Are the TV color controls set properly?
* Are the TV channel fine adjustments set properly?
No game sound
* Is the TV volume too low or off?
* Has any of the cables become loose or disconnected?
Picture on TV
screen is unsteady * Adjust the vertical and horizontal hold controls on your
television until the picture becomes steady
Fringes appear
on TV during
a broadcast
* Is the Audio cable connected properly?
* Is the battery capacity too low?
* Adjust the manual fine tuning adjustment controls on the TV.
Picture is blinking
or distorted * Try pushing the reset button, if there is no improvement, power off
the Plug ‘N’ Play and try again.
No power * Check whether the batteries are installed correctly.
If you still have a problem, please follow the instructions given in this manual and re-connect the
system step by step.
* Information contained in this leaflet is subject to change without prior notice
5