DreamGEAR DGWII-1036 - Manual

FOR TECHNICAL SUPPORT
PLEASE CONTACT: 1-877-999-DREAM
or [email protected]
Dual Charg
ing Sta
tion
SET-UP/CHARGING:
1. Remove the battery cover on your Wii Remote and remove any
batteries that may be installed.
2. Replace the original batteries and cover with one of the included
Rechargeable Battery Packs.
PACKAGE CONTENTS:
• Dual Charging Station
• Power Pass-thru Cable
• 2 Rechargeable Battery Packs
• 2 Battery Pack Charging Adapters
• User’s Guide/Warranty Card
• Registration Card
3. With the Dual Charging Station properly
connected to your Nintendo Wii, place
one or two Wii Remotes into the
charging docks. Note: Battery Packs
can be charged alone by inserting the
included Battery Pack Charging
Adapter into the dock before inserting
the Battery Pack (see below).
4. Charging will begin automatically. The RED LED indicates
charging, the BLUE LED indicates a full charge.
5. The Charging Dock charges your Wii Remotes even if your Wii
console is powered OFF.
6. The blue accent lighting can be turned on or off by switching
between the OFF and ON options on the back of the Dual
Charging Station.
Wii AC adapter
(input)
Connect to the Wii
AC adapter (input)
Connect to Charging
Dock (input)
Using the included
power pass-thru cable:
step 1 step 2