Binatone SGE-9904 - Manual (Page 6)

6
BEFORE USING
THE APPLIANCE
Make sure that the appliance stands reli-
ably on a flat surface.
Before using the appliance for the first time,
wash thoroughly the water reservoir (14), the
water reservoir lid (13), the removable drip
tray (9) and the removable grate (8) with hot
soapy water, then rinse and wipe them.
Wash the metal filter (16) and the filter
holder (12) with running water and dry.
Wipe the coffee maker body (4) with damp soft cloth.
To clean the internal parts of the coffee maker, take the espresso
preparation steps, using water only. Do not place coffee
into the filter!
OPERATING INSTRUCTIONS
Espresso Preparation
1. Install the drip tray (9) and the grate (8) into
the base of the coffee maker.
2. Fill the water reservoir (14) with cold water.
Install the water reservoir (14) on the coffee
maker body (4) and cover with the lid (13).
3. Plug the appliance into an outlet having voltage corresponding
to the information indicated on the appliance. Turn the coffee
maker on, using the “ON” button (7). The “ON” indicator will
light (10).
Warning: never turn on the appliance containing no water!
4. Insert the selected metal filter (16) into the filter holder (12).
Place ground coffee into the metal filter (16), using the mea-
suring spoon (15). Ram the coffee with the bottom part of the
measuring spoon (15).
5. Insert the holder (12) containing the filter into the filter holder
fixing projection (5) and fix the filter holder by turning it
anticlockwise.
6. Place a coffee cup on the removable grate (8) under the filter
holder.
Note: it is recommended that the coffee cup should be
heated prior to using. For this purpose, place the cup
turned upside-down on the cup heating plate (1).
7. When the water heating indicator (2) lights, turn the operat-
ing mode switch (3) to the “cup” position. The coffee brewing
process will start.
8. When a desired amount of coffee is collected in the cup, turn
the operating mode switch to the “O” position.
9. Turn the coffee maker off, unplug it from the outlet and allow
to cool. After the coffee maker has cooled down, remove the